Home


Home

About Us

Product Information

Downloads

Contact Us

Product Highlight

New Products

Locations:

Tulsa

Houston, TX

Oklahoma City

Muskogee

Pryor

Ponca City

Fort Smith, AR

Ardmore

Visit the Trico
web site


Trico Manufacturing Corporation

Central Lubrication Products

Central Lubrication Products

Central Lubrication Products Group

Manual Pumps

Single-shot systems use a manually actuated pump for applications where infrequent lubrication is required.

For applications with less than 50 lubrication points.

Manual or single-shot pumps use meter units to apportion the amount of oil at each lubrication point.

Manual Pumps

         Manual Pumps

Automatic Cyclic Pumps

Automatic lubrication on an intermittent basis.

For applications with up to 50 lubrication points.

Automatic Cyclic pumps use meter units to apportion the amount of oil at each lubrication point.

Automatic Cyclic Pumps

                          Automatic Cyclic Pumps

Continuous Pumps

For large lubrication requirements a continuous system should be used. These systems are commonly used on equipment with a high number of lubrication points.

For applications with up to 200 lubrication points.

Continuous pumps use meter units to apportion the amount of oil at each lubrication point.

Continuous Pumps

                               Continuous Pumps












Opto-Matic Closed System Oilers

This system oiler is designed for all types of equipment where a constant level in a housing must be maintained. Contamination and spillage is prevented.

                     Opto-Matic Closed System Oilers

Hydrolert Products

Designed to monitor levels of moisture in lubricating oils. The Hydrolert products warn of increasing moisture contamination prior to 100% Saturated Relative Humidity (SRH), allowing adequate time for corrective action to be taken before free water occurs.

                                  Hydrolert Products

Watchdog Oil Dryer

Trico WATCHDOG Oil Dryer is a passive dtying ststem designed for bearing housings and other applications where moisture condensation must be minimized. Humidity is substantially reduced in most applications resulting in drier oil.

     WATCHDOG Oil Dryer

Watchdog Oilers

WATCHDOG Closed System Oiler is designed for bearing housings, gear boxes and other oil sump lubrication applications. Ideal for use in the chemical processing, power generation, pulp and pager, and utility industries.

       WATCHDOG Oilers

Expansion Chambers

Expansion Chambers are designed to prevent pressure increase in closed systems. A rolling diaphragm provides a variable volume, that when properly sized, maintains oil housing pressure at or near zero PSI. The reduced pressure will extend seal life and help prevent leakage.

                                        Expansion Chambers

Oil Safe Products

Oil Safe products provide a safe, easy method of transporting, handling, and dispensing lubricating fluids in a wide variety of applications. These products are durable and built with High Density Polyethylene (HDPE) to perform in hostile environments. Ultra-violet and anti-static agents have been added to protect the product from ultra-violet degradation and the accumulation of static electricity.

                                  Oil Safe Products















Lubrication Products

Opto-Matic Constant Level Oilers

These oilers provide a constant level of oil in a pump bearing housing, gear box, or other oil sump application.

               

            Large Capacity                           Glass Reservoir

                                       

                                       Plastic Reservoir

Viewports

To resist corrosion, these viewports are offered in zinc plated steel or brass bodies. Several models and sizes are available.

3-D Viewport with Plastic Lens

Liquid Level Gauges

These level gauges provide easy viewing in many industrial applications. They are ideal for bearings, transformers, and many other non-pressure applications.

                  Liquid Level Gauges

Gravity Feed Oilers

Gravity feed oilers work in a wide range of industrial lubricating applications. The rate of oil feed is adjustable and a lock ring maintains the setting. In bearing or gear lubrication, the gravity feed oilers provide dependable lubrication in the most demanding environments.

             

    Glass Reservoir                   Plastic Reservoir

                        

          Gravity Feed Atlas (large oil capacity)

PC Oil Cups

Oil cups serve a dual purpose of providing a small oil reservoir or being used as an oil gauge.

            Oil Cup

Chain Oilers

Chain oilers are designed for light duty lubrication of small chains and units that will supply lubrication to all types of chain. They operate on a gravity feed principle supplying a pre-set amount of oil through an applicator to the chain. These are offered with single feeds and multiple feeds for wide chains. Solenoid versions are available.

     

  Light Duty (small chains)           All Types of Chain (up to 4")

                        All Types of Chain (with or without solenoid)


                       Chain Applicators (other types are available)

                                     

Streamliner Grease Dispensers

Two spring loaded, refillable types, and two microprocessor controlled units , one that can be refilled and the other is disposable.

          Streamliner Grease Dispensers